Need help identifying an approx value for my chandelier

Discussion in 'Metalware' started by drpeppercan, Nov 23, 2015.

  1. drpeppercan

    drpeppercan New Member

    My 95 years old aunt says it's gold plated, and it was worth $5000 about 20 years ago.

    Any info will be greatly appreciated,

    Thanks,

    DPC

    [​IMG]

    [​IMG]
    [​IMG]
     
    KingofThings likes this.
  2. KingofThings

    KingofThings 'Illiteracy is a terrible thing to waist' - MHH

    Welcome!
    I'd be 'shocked' to learn that this is actually gold plated but others here are better at this than I.
    Good luck! :)
     
  3. drpeppercan

    drpeppercan New Member

    Thanks for sharing KofT :)
    Who knows, you might be right. After all, at her age her memory and judgement are not as accurate anymore. This is why I thought of asking around.

    DPC
     
    KingofThings likes this.
  4. verybrad

    verybrad Well-Known Member

    Sorry to say that it looks to be brass plated with applied patina. I would say 1970s or later and very minimal value........ sorry.
     
    KingofThings likes this.
  5. drpeppercan

    drpeppercan New Member

    Thanks a million for your info verybrand :)
    What approximate value would you give it? If I may ask...
     
    KingofThings likes this.
  6. evelyb30

    evelyb30 Well-Known Member

    Around here the local ReStore (Habitat for Humanity) pretty much has to give those away. They go for $20-30, give or take, but that's the local market.
     
    KingofThings likes this.
  7. KingofThings

    KingofThings 'Illiteracy is a terrible thing to waist' - MHH

    I concur. I have sold them painted up Shabby Chic style for $80 or so and they are everywhere.
     
  8. yourturntoloveit

    yourturntoloveit Well-Known Member

    Drpeppercan, in the third (last) photo you posted -- what is the "decoration" going around the rim where the arms are attached? The "motif" does not appear to be the same from one to another.

    I can see only one which is complete, but the other two (which are "halves") don't seem to match even each other.

    And the one that is complete (in the middle) looks like it has some sort of "marks" at the top just below the "upper" rim in the photo.

    Can you tell what those "marks" are? Just curious.;)
     
    KingofThings likes this.
  9. drpeppercan

    drpeppercan New Member

    Thank you everyone for sharing.
    So I better polish this chandelier and hope to be lucky to sell it for around $100. Or $20 if it comes to that ;)

    YTTLI, I'll try to take more/better photos asap.
     
  10. springfld.arsenal

    springfld.arsenal Store: http://www.springfieldarsenal.net/

    Dba
     
    Last edited: Nov 25, 2015
    KingofThings likes this.
  11. CathyWC

    CathyWC New Member

    If you could take off one of the candle sleeves and get a shot of the recepticle. That could possibly help to date it.
     
    KingofThings likes this.
  12. hamptonauction

    hamptonauction Well-Known Member

    Looking at the hardware and fittings, I agree with the others, 70's or later and $20 - $30.
     
    KingofThings likes this.
  13. drpeppercan

    drpeppercan New Member

    Here are some more photos:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  14. verybrad

    verybrad Well-Known Member

    Pretty much confirms my thoughts that this is 70s or later. It appears to be brass with applied patina and lacquer coating. Polishing will remove this applied patina and would be very difficult to accomplish. I wouldn't do anything more than clean it. I seem to see Made in Spain on the stem.
     
    KingofThings and komokwa like this.
  15. drpeppercan

    drpeppercan New Member

    verybrad, you are a keen observant! To see that little "Spain" text on the photo! Even having the thing itself here with me wasn't enough for me to notice it, LOL
    I went to the chandelier to see it better and yes! It does say: Spain.
    Thanks so much for all the valuable info, and the advise to not polish it.

    Cheers!

    Javier
     
  16. komokwa

    komokwa The Truth is out there...!

    I trust you've now learned to take your aunts estimation with a grain.......no make that a steam shovel ...of salt !! :):)
     
  17. drpeppercan

    drpeppercan New Member

    No kidding! You bet I have!
    Now if she would only accept this.
    My telling her about the earlier replies only got her to lower the price to $4000 in the local classifieds! And very reluctantly! LOL
    I haven't told her about not being made in Italy, I don't see the point...

    Cheers!

    J
     
    komokwa likes this.
  18. komokwa

    komokwa The Truth is out there...!

    Still....gotta like her Moxy !!!
     
  19. drpeppercan

    drpeppercan New Member

    Right, whether she's aware of it or not, LOL
     
    komokwa likes this.
Similar Threads: Need help
Forum Title Date
Metalware Need help with gong Jul 17, 2024
Metalware Hello. Need help to identify if these two candlestick are old or modern. Jun 12, 2024
Metalware Large copper pitcher need help with age etc. Jun 11, 2024
Metalware Need Help Copper Piece ID/Maker Apr 9, 2024
Metalware Need help on this gold inlaid disk Dec 2, 2023

Share This Page