Wood Warping Emergency - 1920 spool bed matching dresser drawer liner

Discussion in 'Furniture' started by KikoBlueEyes, Feb 27, 2019.

  1. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Completely stupid. I have a high boy dresser that came with my 1920 Sligh Furniture mahogany four poster spool bed (Dated by tag). I put some slightly wet socks in one of the drawers, which is sealed so I thought it would be okay. :banghead::banghead::banghead::banghead::banghead::banghead: Well it warped the thin wood liner under the drawer. @James Conrad and @verybrad I need your help. What can I do to correct the warping? IMG_1712.jpg
     
    Ghopper1924 likes this.
  2. James Conrad

    James Conrad Well-Known Member

    You mean the "dust board" not the drawer bottom itself?
     
    Ghopper1924 likes this.
  3. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    is that what its called? the drawer is fine but the dust board is warped about an inch in two places. it is thin. now you mention it I realized that I stuffed some wet things in the drawer below it too. dryer on the fritz
     
    Last edited: Feb 27, 2019
    Ghopper1924 likes this.
  4. James Conrad

    James Conrad Well-Known Member

    LOL @ dryer on the fritz! Well, unless it's rubbing drawer i would LEAVE IT BE. It might go back on it's own accord.
     
  5. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Thank you. I'll stop panicking!
     
    Ghopper1924 likes this.
  6. James Conrad

    James Conrad Well-Known Member

    Yeah, good idea and goes without saying, water & wood don't work well together!:hilarious:
     
  7. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    I don't know what I was thinking. I love my bed and dresser and wouldn't harm them for the world. Water bad. Listen to James.
     
    kyratango, Ghopper1924 and judy like this.
  8. James Conrad

    James Conrad Well-Known Member

    Wait for Brad, he may have some ideas on repair of warping.
     
    Ghopper1924 and KikoBlueEyes like this.
  9. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Will do. Right now I've taken the drawers out to let it dry.
     
    Ghopper1924 likes this.
  10. verybrad

    verybrad Well-Known Member

    Don't think there is much you can do other than wait for it to dry. Hard to tell what is going on from the pic provided. If bowing up, you might try putting some weight on it as it dries. Otherwise, if the warping doesn't affect drawer operation, it is not that big of a deal.
     
  11. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Thanks very much for weighing. It’s bowed up. I think I cut a piece of plywood to size and put bricks on top what do you think?
     
    kyratango and Ghopper1924 like this.
  12. daveydempsey

    daveydempsey Moderator Moderator

    Turn it upside down and put a weight on the bowed side and allow to dry..
     
  13. James Conrad

    James Conrad Well-Known Member

    Can't hurt!
     
    KikoBlueEyes and Ghopper1924 like this.
  14. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Thanks for chiming in Dave. It's not the drawer, but I applied the same principle you recommended to the bowed up side of the dust board.
     
    Last edited: Feb 27, 2019
    Ghopper1924 likes this.
  15. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    Thank you all for all your advice. I really appreciate it. Hopefully it will go down. The warping impedes the operation of one of the top drawers.
     
  16. daveydempsey

    daveydempsey Moderator Moderator

    That is what I meant, turn the whole unit up.
     
  17. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    This thing is massive with a large mirror on top that probably hasn't been removed in a hundred years. I don't have your muscles. Unless you want to come across the pond and help :greedy::greedy::greedy::greedy::greedy:
     
    Ghopper1924 and kyratango like this.
  18. daveydempsey

    daveydempsey Moderator Moderator

    I'm not flying anywhere :D
    Try a small bottle jack with a piece of flat thin wood on top and apply pressure.
     
    Ghopper1924 and KikoBlueEyes like this.
  19. KikoBlueEyes

    KikoBlueEyes Well-Known Member

    I'll give that a try. I'll have to wait until my neighbor comes home. He has different tools
     
    Ghopper1924 likes this.
  20. daveydempsey

    daveydempsey Moderator Moderator

    Talking of muscles, I've either torn or strained an abductor muscle in my right shoulder, tossed an 8 foot length of wood javelin style into the tip and got what felt like an electric shock along my upper arm.
    I'm fine lifting heavy things all day but when I relax or sleep it feels like tooth ache in my shoulder, its waking me up.
    My sons physio suggested a Thai massage :rolleyes:
     
Draft saved Draft deleted
Similar Threads: Wood Warping
Forum Title Date
Furniture Age of Chinese wood carvings Oct 19, 2024
Furniture Wood chair...spool, spindle, bobbin? Age? Sep 27, 2024
Furniture Queen Elizabeth Wooden Deck Chair Sep 18, 2024
Furniture Bentwood chair Aug 23, 2024
Furniture Two older wooden chairs with wicker seats Aug 12, 2024

Share This Page